Understanding the "Eco-Cise" Cycle:

Those who own a standby generator know your generator’s weekly test  is important to maintain and monitor generator readiness.   At Briggs & Stratton, we design our standby generators  to be smart, efficient, and—above all—reliable.

One of the most common questions we get during the winter months is: "Why didn't my generator run its weekly exercise cycle today?"

If you've noticed your generator staying quiet when it’s freezing outside, don't worry—it’s actually working exactly as designed. Here is everything you need to know about our Eco-Cise™ technology and why "skipping a workout" is sometimes the best thing for your engine.

The Power of Eco-Cise™: Efficiency by Design

Most standby generators on the market run weekly self-tests—typically 5 to 20 minutes for residential units and 20 to 30 minutes for commercial systems. While this keeps the battery charged and the oil circulating, it also consumes fuel and creates noise.

Briggs & Stratton’s  Eco-Cise™ mode is different. We’ve shortened the weekly test to just 16 seconds. This ultra-brief cycle is all the engine needs to verify that the starter, fuel system, and internal components are ready for action without the waste.

How the 16-second cycle works: 

Unlike longer cycles, the default 16-second exercise maintains peak performance throughout to ensure a rapid and thorough system check.

1. Start Delay: The first 10 seconds serve as a safety "on-delay."

2. Active Exercise: This is followed by a 6-second (0.1 minute) exercise period.

3. Consistent Power: During this entire 16-second window, the engine runs at 3600 RPM, ensuring the system is fully primed and responsive.

Flexible Options for Longer Exercises

We understand that some users prefer a longer run-time for additional peace of mind. If you choose to set your exercise cycle for 5, 10, 15, or 20 minutes, the system utilizes a smart RPM step-down to save energy:

• Initial Verification: The first 10 seconds always run at 3600 RPM to ensure a stable start.

• Eco-Mode: For the remainder of the chosen duration, the engine drops down to 2800 RPM, significantly reducing noise pollution and fuel consumption while still maintaining vital fluid circulation.

The "40°F Rule": Protecting Your Engine from Moisture

The biggest threat to a cold engine isn't the cold itself—it’s moisture.

When you run an engine for a short period without a "load" (meaning it’s not actually powering your house), the internal temperature doesn't get hot enough to evaporate condensation. In freezing temperatures, this moisture can mix with your oil, creating a "milky" sludge that reduces lubrication quality.

The Cold Weather Skip: If the ambient temperature is below 40°F (4°C), your Briggs & Stratton generator will automatically skip its weekly exercise. We do this to:

• Prevent Moisture Buildup: Keeping the engine off prevents condensation from forming in the oil during a "no-load" run.

• Reduce Wear and Tear: Cold starts are the toughest part of an engine’s life. If it’s not a real emergency, we’d rather save that "start" for when you actually need power.

Important Note: Skipping an exercise cycle does not affect your generator’s ability to start during a real power outage. If the power goes out, the system will start immediately, regardless of the temperature.

What About Long-Term Moisture? (The Bi-Annual Burn-Off)

Because our weekly cycles are so short, we’ve built in a "Deep Clean" for your engine. Twice a year, in April and September, your generator will perform a 45-minute bi-annual burn-off.

This longer run time allows the engine oil to reach a high enough temperature to fully evaporate any moisture that has accumulated over the previous months. It’s like a detox for your generator's internal components.

Pro-Tips for Dealers & Homeowners

For Homeowners:

• Check the Status: If your generator skips a cycle, your controller or EnergyTrak™ app may show a notification. This is normal and requires no action.

• Don't "Manual Test" in the Cold: Resist the urge to manually start your generator for a few minutes when it's freezing. If you must run it, let it run long enough to get warm, or wait for a warmer day.

For Dealers:

• Educate During Install: Ensure customers understand that the 16-second "Eco-Cise" and the "40°F Skip" are premium features designed to extend the life of the Vanguard® engine.

• Flexibility: While 16 seconds is the default, the controller offers five duration options (0.1 min to 20 min). However, the 16-second default is highly recommended for fuel savings and engine health.

The Bottom Line

At Briggs & Stratton, we believe in smart power. By skipping short exercises in extreme cold, we protect your investment from moisture and unnecessary wear, ensuring that when the grid goes down, your generator is ready to step up.

Have questions about your exercise settings? Contact your local Briggs & Stratton dealer today or check your operator’s manual online.