4 min read

GENERATOR & ENERGY STORAGE BASICS

Battery Storage Warranty Top Coverage Points

Home Battery Warranties Explained: SimpliPHI® 6.6 15-Year Coverage
8:47

Quick Overview: SimpliPHI 6.6 Home Battery & Warranty Essentials

Home battery storage warranties safeguard your energy resilience against natural chemical degradation, ensuring reliable backup power during utility grid outages. Key warranty metrics to evaluate include cycle life, energy throughput, end-of-life capacity retainment, and labor service coverage. The Briggs & Stratton SimpliPHI® 6.6 Battery System features safe Lithium Ferro Phosphate (LFP) chemistry and comes with a 15-year warranty. Briggs & Stratton Energy Solutions acts as your trusted guide, drawing on more than 115+ years of power expertise to make energy independence simple, safe, and reliable.

 


 

Taking control of your home's energy shouldn't feel complicated. Whether you want to lower utility bills, store extra solar power, or keep critical home systems running during grid outages, choosing the right battery energy storage system (BESS) provides true peace of mind.

 

BAS-Blog-Banner1

 

Understanding Battery Degradation

Like smartphones or laptops, home energy storage batteries gradually lose capacity over time through routine charging and discharging cycles. Battery degradation happens with every cycle a battery charges and discharges. Degradation decreases your battery's power capacity, life, and strength over time. There are three primary drivers of battery wear:

Energy Capacity vs. Operating Time

  • Operational Factors: High discharge rates and frequent deep cycling accelerate internal cell wear.
  • State of Charge (SOC): Holding batteries at a high state of charge for extended periods increases internal chemical stress.
  • Ambient Temperature: Extreme heat or freezing conditions alter chemical reaction rates and reduce total operational lifespan.

Adhering to operating guidelines and utilizing LFP chemistry minimizes degradation and helps extend a battery’s total system life.

Figure 1: Battery degradation
(due to natural wear and tear) reduces BESS performance (source)

 


 

Key Components of Battery Storage Warranties

 

BAS-BatteryLifeBattery Cycle Life Expectations

The number of charge and discharge cycles a battery can withstand without decreasing efficiency is known as its cycle life. Some manufacturers restrict the number of times you may cycle your battery; exceeding this condition may violate the warranty. The battery cycle life warranty is frequently determined by its chemistry and depth of discharge, as shown in Figure 2.

Briggs & Stratton does not put a restriction on cycles.


 

BAS-EndWarranty

End of warranty capacity

Manufacturers will also mention the end storage capacity rating of your battery cycle life; this might say a battery warranty of 6,000 cycles with 30% degradation, which means it is guaranteed that at the end of 6,000 cycles, the battery has not lost over 30% of its capacity to store power and has retained 70% of its initial capacity.

 

BAS-Throughput

Throughput

Throughput in a warranty specifies the entire amount of energy (in terms of megawatt-hours) that the manufacturer anticipates the battery's capacity to provide during its lifespan based on installed guidelines. Assume a battery manufacturer guarantees a throughput warranty of 37 MWh. The expectation is that over the period of the warranty, the battery will provide this much capacity and warrants the value of 37MWh.

 

BAS_Labor

Labor and shipping costs

Many manufacturers' warranty agreements exclude labor fees. A confident manufacturer will provide a labor stipend and travel costs in their contract if you require a replacement battery within the warranty period. Although the manufacturer could replace a faulty battery, they often will not cover the labor cost for reinstallation. Some local installers will pay for upkeep and repairs as part of their workmanship guarantee, or you can source third-party warranties for gap coverage.

Many manufacturers are responsible for the material expenses of the substitute component, but not the shipping costs. However, one option is to have equipment shipped to a local contractor, who would also be responsible for delivering and installing the items at your residence or business.

 

BAS_Warranty

Warranty Duration

Almost all battery producers offer a warranty that guarantees the functioning of their batteries for a specific number of years. These warranty periods may fluctuate based on how confident the manufacturer is in their product. The majority of batteries have warranties between 5 and 15 years. Ranging from 10 to 15 years, Briggs & Stratton is one of the few battery manufacturers with a proven history and performance for over 10 years, offering robust warranty durations.

 

BAS-Workman

Workmanship

Installers tend to be the core parties accountable for issuing workmanship warranties for your battery installation.

 


 

BAS-Blog-Banner3

Limitations and exceptions in warranty

Companies have to defend themselves against illegitimate complaints. Therefore, battery warranties have some limitations and exceptions that vary by manufacturer. Here are some of the most important limitations and exceptions you should consider:

Transferability

Can you freely transfer or assign your battery warranty to future homeowners? Will you need to pay additional charges to transfer the warranty?

Conditions of installation

Check the conditions, like whether you can hire any installer or must work with a certified installer. Is it possible to do a DIY installation, or does it violate your warranty?

Proximity concerns

If your home is near a beach or river, this could violate the warranty of some manufacturers. They will void their battery warranties if you operate them near saline water bodies because they can corrode the BESS casings.

Acts of nature

Nearly all battery system manufacturers will not take responsibility for any harm brought by uncontrollable natural disasters like storms, floods, earthquakes, etc. So, most of the time, the homeowner’s or business owner's insurance company will need to compensate for the damage that occurs due to extreme weather.

 


BAS-Blog-Banner2-1

 

15-Year Warranty Protection You Can Count On

When evaluating battery warranties, look beyond basic hardware coverage and demand a comprehensive plan that guarantees long-term energy performance while covering professional service labor costs. Many manufacturers only replace faulty components, leaving homeowners and installers with unexpected out-of-pocket fees for service calls and diagnostics. Choosing a full-lifecycle warranty backed by a stable energy partner ensures your battery maintains peak capacity and eliminates hidden repair expenses.

To give homeowners and installation partners complete confidence, Briggs & Stratton offers a 15-year limited battery warranty on SimpliPHI 6.6 systems.

  • $150 Service Reimbursement: Certified dealers and installers receive $150 per approved service visit to cover trip and diagnostic labor costs.
  • Modular Scalability: Each 6.65 kWh module utilizes wire-free RapidStak™ technology, scaling up to 119.7 kWh for total energy coverage.
  • Bankable Reliability: Backed by a century-tested American brand, ensuring warranty commitments remain secure for the long haul.

 


 

Frequently Asked Questions

 
Does the SimpliPHI 6.6 battery system come with a 15-year warranty?

Every SimpliPHI 6.6 battery includes a standard 15-year limited warranty. Briggs & Stratton provides this extended coverage across all SimpliPHI 6.6 installations, ensuring long-term energy security without requiring specific installer tiers or certifications.

How does the $150 truck roll reimbursement work for service calls?

For approved warranty service visits, Briggs & Stratton provides certified dealers and IQ installers with a $150 reimbursement to help cover service labor and travel expenses.

How scalable is the SimpliPHI 6.6 battery system?

Each SimpliPHI 6.6 module delivers 6.65 kWh of storage. You can stack up to three units together for 19.95 kWh, or connect multiple stacks in parallel for up to 119.7 kWh of total storage.

Can the SimpliPHI 6.6 be installed outdoors?

Yes. The SimpliPHI 6.6 features an IP65 all-weather rating, allowing safe installation indoors or outdoors without purchasing additional protective cabinets.

 


 
 

Ready to experience true energy independence?

Request a consultation with a Briggs & Stratton dealer or installer near you by clicking the button below.

LEARN MORE